ico
Home page / Goods / Categories /

Torque Sensors

TORQUE SENSORS

GMV2

picture

GOOD DESCRIPTION

The GMV2 is a microprocessor-controlled supply and display unit for various applications in torque-measurement. In screwing sector as well as on test benches in laboratory sector, with appropriate sensors detected measurement values for torque, angle, speed and power can be displayed, evaluated conforming to pre-set limits and stored. The handling using a self-explanatory menu is carried out in simple steps. Using a torque transducer with integrated recognition chip the sensor data will be transmitted automatically into the parameter set by connecting the transducer to GMV2. For better distinction the parameter-sets and data-sets can be named with text. The input of data-set names can happen optional using a bar code scanner. The access to the general settings can be limited by using passwords in three levels. The measured values will be internal stored in combination with date and time and they can be printed out by an external printer or transmitted to an existing EDP. External controlling of the unit is possible using control inputs. Optical signals or for example the shut down of an electric screwdriver with a separate power section can be controlled by switched outputs. Customized functions can be realized on demand.

MORE

ValueView 291-1

picture

GOOD DESCRIPTION

• Resolution 24 bit • Sampling rate up to 50 measurements / s • Permanent min / max display • tare function • Sensor supply • +/- full scale input • Peak value measurement

MORE

PU5

picture

GOOD DESCRIPTION

The panel meters PU5 are multi-purpose. The standard panels have an accuracy of 24 Bit, a measuring rate of 50 measurements/sec, a MIN/MAX store, 30 points linearisation and an optical switching point display. The units optional can be fit out with 4 independent scalable switching points, an analogue output and a serial interface. They have 5 digits and are available in the assembly dimension 96x48. Power supply for active torque transducer happens with an external device.

MORE

DRFS 1/4

picture

GOOD DESCRIPTION

• No service needed because of contactless data acquisition • High accuracy due to frequency modulation and strain gage technology • Single power supply • High noise immunity due to amplified active signal • integrated sensor-detection chip for use with GMV2 analyzer

MORE

DRFN

picture

GOOD DESCRIPTION

Features DRFN • No service needed because of contactless data acquisition • High noise immunity due to amplified active signal • High accuracy due to frequency modulation and strain gage technology • Single power supply • Optional angle detection • integrated sensor-detection chip for use with GMV2 analyser.

MORE

DRT1

picture

GOOD DESCRIPTION

Suitable for:· • ·test of pulsed tools • torque wrenches • ·electric screwdriver Special features:· • ·insensitive for bending force • ·for fixed mounting· • replaceable adapter

MORE

DRT2

picture

GOOD DESCRIPTION

Suitable for:· • ·test of pulsed tools • torque wrenches • ·electric screwdriver Special features:· • ·insensitive for bending force • ·for fixed mounting· • replaceable adapter

MORE

DRT3, DRT4

picture

GOOD DESCRIPTION

Suitable for:· • ·test of pulsed tools • torque wrenches • ·electric screwdriver Special features:· • ·insensitive for bending force • ·for fixed mounting· • replaceable adapter

MORE

MT-DKM/DRN 1/4" - 3/4"

picture

GOOD DESCRIPTION

Suitable for:· • ·testing of torque wrenches • ·precisely tightening of screws • ·measurement of screwings on badly re achable places • ·measurement of the friction factor • ·measurement of load on flap valve drives, max 2 turns Special features:· • ·Measurement range 2Nm – 1000Nm • ·Accuracy 0,15 % full scale • ·Protection IP50 • Adaptable with standardized square drive DIN3121 • ·Control-input for checking the measure ment chain

MORE

MT-DKM

picture

GOOD DESCRIPTION

Special features:· • no maintenance needed • contactless • build-in measurement amplifier • single supply voltage • wide application range • small outline • low moment of inertia • speed detection (option) • angle detection (option)

MORE

MT-DKM/DRBK

picture

GOOD DESCRIPTION

Special features:· • Very short construction • Broad input voltage range • Current output and voltage output • Measurement accuracy: ≤ 0,5% of full scale • Measurtement ranges from 5 to 1000 Nm • Contactless transfer of measured signal • Approved strain gauge technology • Internal measurement amplifier • Speed detection optional available • Simple power supply • Multipurpose use

MORE

DRWPL

picture

GOOD DESCRIPTION

Special features:· • waterproof (IP67) • contactless • build-in measurement amplifier • single supply voltage • wide application range • small outline • low moment of inertia • speed detection (option) • angle detection (option)

MORE

MT-DKM/DRDM

picture

GOOD DESCRIPTION

Supply Voltage: 12V DC +-10% Current Consumption: approx. 120mA Rise Time 10-90%: 1ms (1kHz) Voltage Output: 0- ±10V Internal Resistance: 100 Ω Ripple: < 100mVss Nonlinearity: <0,15% Hysteresis: <0,1% Deviation at zero point: ≤ ± 100mV Operating Temperature: 0-60°C Compensated Temperature Range: 5-45°C Temperature Fault Zero Point: 0,02%/K Sensitivity: 0,01%/K Mechanical Overload: 100% Connection: 2,5m connection cable with flying leads

MORE